The 4BANK "Select" System consists of a four lamp fixture operated by a remote ballast.
Select Ballast is flicker free at any camera speed or shutter angle
with controls to power four lamps with individual lamp switching at
high-output or standard-output settings. The same ballast will power 4ft
or 2ft fixtures.
The 4BANK "Select" System is a soft key or fill
can be used instead of diffusing light through fabric or bouncing light
off foam core, as with conventional HMI or tungsten sources.
As a comparison, the 4ft 4BANK is equal to a 1.2K HMI fresnel bounced, with these added advantages:
–Lower power consumption.
–Better control of light with barn doors and louvers.
–Uses less set space.
–Can match to daylight, tungsten or existing fluorescent lighting without filtration.
The lightweight fixtures, weighing from 6 lbs to 10 lbs, make a day of
multiple set ups quick and easy. At the end of the day, lamps can remain
in the fixture for storage and transportation.
To change the
color temperature, select
the appropriate lamp. Refer to "Lamps" section for Kino Flo
color-correct lamps balanced to 2900 Kelvin, 3200 Kelvin and 5500