Save Energy with ETC Source 4 Lustr Tungsten LED Ellipsoidal Stage Spot Light

Etc-source-4-s4-led-lustr-tungsten-stage-spot-light-ellipsoidal
ETC Source 4 LED Tungsten is a non-variable white light fixture with a
3000°K color temperature. Features power and DMX in/thru for easy setup.
User-friendly control interface offers multiple fixture modes and
fixture settings. Up to nine (9) fixtures may be linked together on one
15A non-dim circuit.The Luxeon Rebel LED emitters are rated for 50,000
hours. The unit featured here includes the LED engine and shutter gate
assembly. Add your desired ETC Source 4 EDLT (enhanced definition lens
tube) to complete the fixture.

Lustr+, Daylight, and Tungsten light engines work with all Source
Four lens tubes to deliver a high quality controllable beam of LED
light. For the best results it is highly recommended that EDLT
versions are used. We also offer a special LED only version of the 50°
lens tube.

When developing the Source Four LED™ line of
luminaires, ETC focused on making sure the light quality could stand up
to the standards of the Source Four® brand. Source Four LEDs look and
act like a traditional Source Four fixture, with sharp shuttering,
smooth fades, clean edges, beam smoothness, and great shutter cuts. They
also add in the superior color-mixing power of the Selador® x7 Color
System™, resulting in a theater-worthy lighting tool.

The
super-efficient Source Four LED Tungsten™ luminaire creates stunning
warm-spectrum white light with a 3200K color temperature. The
high-light-volume, low-energy fixtures replicate the light of
conventional tungsten sources while requiring less power to run. Source
Four LED Tungsten fixtures can be a stand-in for or used alongside
tungsten units for large quantities of rich, warm white light.

Source
Four LED luminaires are the same size as a traditional Source Four, so
you can use them on a regular light rig without worrying about taking up
too much space. Even at their compact size, they are incredibly
efficient, with a better lumens-per-watt ratio than other, larger LED
spots. And with a 50,000-hour lamp, you won’t spend time swapping out
bulbs.

Intelligence comes standard. Drawing on ETC’s
industry-leading experience with control systems, Source Four LEDs are
outfitted with a user interface with convenient settings and modes to
simplify work and customize fixture performance.

Source Four LED
luminaires
use the same barrel, accessories and lenses as traditional
Source Four fixtures. Adding an ETC Source Four EDLT (Enhanced
Definition Lens Tube) to a Source Four LED makes the beam even crisper
for the best possible performance. All of the same EDLT lens options are
available for the Source Four LED, along with an LED-only 50° tube.

Product Features

  • 60 Luxeon® Rebel LED emitters
  • 50,000-hour LED life
  • 3000K array for tungsten emulation
  • Includes slots for glass or stainless steel patterns and soft focus diffuser
  • Accessory slot for motorized pattern devices or optional iris
  • Power and DMX in/thru connections for easy setup
  • Up to nine fixtures can be linked via power in/thru connectors
  • DMX512 in/thru via five-pin XLR connectors
  • 15-bit virtual dimming engine for smooth fades and minimal color shift during dimming
  • ETL Listed to UL1573; IP20 rated
  • Available in black (standard), white or silver (optional) or custom fixture-body colors
This entry was posted in Film, filmmaking, photography, stage lighting, Television, theater lighting and tagged , , , , , , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *